Weight — 235 kg
Machine size — 1075x664x1055 mm
Packing size — 1270x700x1280 mm
Welding head weight — 0.8 kg
Fiber length — 10 / 15 m
Machine size — 1075x664x1055 mm
Packing size — 1270x700x1280 mm
Welding head weight — 0.8 kg
Fiber length — 10 / 15 m
Weld depth — 2 / 3 / 5 / 7
Operating humidity range — 30-70 %
Laser source — Raycus
Laser wavelength — 1080 nm
Cooling — water
Focal length — 150
Operating temperature range — 5-40 ℃
Laser power — 1000 / 1500 / 2000 / 3000 W
Laser frequency — up to 20 kHz
Operating mode — CW
Operating humidity range — 30-70 %
Laser source — Raycus
Laser wavelength — 1080 nm
Cooling — water
Focal length — 150
Operating temperature range — 5-40 ℃
Laser power — 1000 / 1500 / 2000 / 3000 W
Laser frequency — up to 20 kHz
Operating mode — CW
Protective lens — 20x2
Control system — Relfar
Welding head — FWH20-DS50A
Focal length — 150 mm
Mode setting — Yes
Collimator focal length — 50 mm
Control system — Relfar
Welding head — FWH20-DS50A
Focal length — 150 mm
Mode setting — Yes
Collimator focal length — 50 mm
Drive type — step motor
Feeding speed — 80 mm/min
Length of wire guide — 10 m
Wire diameter — 3.0 mm
Feeding speed — 80 mm/min
Length of wire guide — 10 m
Wire diameter — 3.0 mm
Welding gun functions
Laser source
Control desk
User-friendly interface for creating quality welds. The wide range of settings makes all types of welding patterns accessible even to the novice user. It takes about one day to learn how to operate and maintain the machine! The touch panel is dust-proof and remains operable under all circumstances.
The machine is equipped with a high quality RECI fibre laser emitter however, other brands are also available: IPG, Raycus, and JPT. The service life of a fibre laser emitter is more than 100,000 hours. The choice of source depends on the customer's wishes and required tasks. To weld large thicknesses including double-sided welding, IPG and Reci laser sources are preferred while any of the above brands can be used to weld thin metals.
The machine software allows you to change the joint thickness and welding patterns: circular, square, C-pattern, V-pattern, figure 8, etc. For ease of use, an additional display on the handpiece shows the current settings.
About us
At Virmer, we advise you, before and after the purchase on the machines and the best ways to use them
Customer support
Delivery guarantee
The equipment undergoes a 3-stage quality check, first at the manufacturer's factory in China, then when it arrives at the warehouse in the Netherlands, and finally before it is shipped by the transport company to your business
Showroom and Demo
We welcome you to our showroom in the Netherlands to test our brand-new machines on your samples.
We also offer you online demo: send us your samples, we process them and return them to you. We can also make a videocall to show you how our machine works without you leaving your workshop
Eisenhouwerweg 5F, 5466 AB, Veghel the Netherlands
+31 85 273 1786
info@virmer.com
We also offer you online demo: send us your samples, we process them and return them to you. We can also make a videocall to show you how our machine works without you leaving your workshop
Eisenhouwerweg 5F, 5466 AB, Veghel the Netherlands
+31 85 273 1786
info@virmer.com
Warranty
Our equipment is under warranty for 24 months and can be extended up to 60 months
Wattsan machines are equipped with the most reliable and common components in the world
Our partners
Submit your contact information, and our experts will answer any your question
Warranty up to 5 years
Local service all over the Europe
Delivery guarantee
Showroom and Demo
Get an expert consultation
By submitting your personal contact data, you give a permission to process it due to privacy policy
Submit your contact information, and our experts will answer any your question
Warranty up to 5 years
Local service all over the Europe
Delivery guarantee
Showroom and Demo
Get an expert consultation
By submitting your personal contact data, you give a permission to process it due to privacy policy