Laser machine WATTSAN 1290 DUOS LT
Bench-type machine for small-scale production lifting manual table
€
9969
€
Working area — 1200 * 900 mm
Machine size (L * W * H) — 1410 mm * 1790 mm * 670 + 315 mm (if on its wheels)
Packing size — 1880*1490*810 mm
Weight — 393 kg
Machine size (L * W * H) — 1410 mm * 1790 mm * 670 + 315 mm (if on its wheels)
Packing size — 1880*1490*810 mm
Weight — 393 kg
Laser power — 100-120 W
Engraving depth — 3 mm
Max. cutting thickness (wood) — 10-13 mm
Diameter of mirrors — 25 mm
ZnSe lens — o20 f-50
Focal length — 50 mm
Laser tube life — 10000 h
Engraving depth — 3 mm
Max. cutting thickness (wood) — 10-13 mm
Diameter of mirrors — 25 mm
ZnSe lens — o20 f-50
Focal length — 50 mm
Laser tube life — 10000 h
Table model — Lamels
Lifting table — Yes
Lowering depth of the work table — 160 mm
Control system — Ruida RDC 6445G
Cutting speed — 0-500 mm/s
Engraving speed — 0-700 mm/s
Cooling — Water
Electric power supply — 220V
Power consumption — 2050
Through table — Yes (Y-axis)
Y-axis structure — Linear guide AMT PMI MSB 15S
X-axis structure — Linear guide AMT PMI MSB 15S
Engine on X — 57-H350C / SH
Engine Y — 57-H350C / SH
Lifting table — Yes
Lowering depth of the work table — 160 mm
Control system — Ruida RDC 6445G
Cutting speed — 0-500 mm/s
Engraving speed — 0-700 mm/s
Cooling — Water
Electric power supply — 220V
Power consumption — 2050
Through table — Yes (Y-axis)
Y-axis structure — Linear guide AMT PMI MSB 15S
X-axis structure — Linear guide AMT PMI MSB 15S
Engine on X — 57-H350C / SH
Engine Y — 57-H350C / SH
Waste collection compartment
Frame design
Universal mounting
The universal mounts make alignment easy. Such mounts allow you to install a laser tube of various diameters and sizes, as well as adjust the optics vertically and horizontally
The frame design is one of the main advantages of Wattsan machines. Robust and sturdymaterial and heat pre-treatment maximise the service life of the machine. The vibration-absorbing frame allows almost all types of material to be machined at high speeds
Protects against the ingress of production waste into the lifting mechanism, extends the service life of the machine, and provides additional rigidity
Reinforced gantry
Helps to avoid inertial vibrations when processing material at high speeds. Thanks to the reinforced gantry, undercuts and other undesirable results are avoided
Stepper motors and belt gearboxes
Three-phase type stepper motors and a belt-driven gearbox (4:1) ensure the highest level of engraving quality and precision. This is due to the reduced load by splitting the number of steps
Nozzle and mounting
Two laser tubes and two cutting heads
The nozzles supplied in the kit have a wide and narrow cross-section. They can be used for both, cutting and engraving. The finished product will be fully protected against defects, including fouling after machining
Machines with two laser tubes and heads significantly increase production volumes due to the simultaneous processing of small products
Conveyor table
The conveyor table allows a continuous and uniform feeding of the material with a tension that facilitates cutting
Table lowering chain and asynchronous motor
For processing heavy materials such as stone, the Wattsan LT series machines are equipped with a chain and asynchronous motor, which can lift materials weighing up to 80 kg
Made on Wattsan's CO2 Lasers
About us
At Virmer, we advise you, before and after the purchase on the machines and the best ways to use them
Customer support
Delivery guarantee
The equipment undergoes a 3-stage quality check, first at the manufacturer's factory in China, then when it arrives at the warehouse in the Netherlands, and finally before it is shipped by the transport company to your business
Showroom and Demo
We welcome you to our showroom in the Netherlands to test our brand-new machines on your samples.
We also offer you online demo: send us your samples, we process them and return them to you. We can also make a videocall to show you how our machine works without you leaving your workshop
Eisenhouwerweg 5F, 5466 AB, Veghel the Netherlands
+31 85 273 1786
info@virmer.com
We also offer you online demo: send us your samples, we process them and return them to you. We can also make a videocall to show you how our machine works without you leaving your workshop
Eisenhouwerweg 5F, 5466 AB, Veghel the Netherlands
+31 85 273 1786
info@virmer.com
Warranty
Our equipment is under warranty for 24 months and can be extended up to 60 months
Wattsan machines are equipped with the most reliable and common components in the world
Our partners
Submit your contact information, and our experts will answer any your question
Warranty up to 5 years
Local service all over the Europe
Delivery guarantee
Showroom and Demo
Get an expert consultation
By submitting your personal contact data, you give a permission to process it due to privacy policy
Submit your contact information, and our experts will answer any your question
Warranty up to 5 years
Local service all over the Europe
Delivery guarantee
Showroom and Demo
Get an expert consultation
By submitting your personal contact data, you give a permission to process it due to privacy policy